ASTM D4769-12
Standard Specification for Woven and Warp Knitted Comforter Fabrics
- Standard No.
- ASTM D4769-12
- Release Date
- 2012
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D4769-12(2018)e1
- Latest
- ASTM D4769-12(2018)e1
- Scope
Upon mutual agreement between the purchaser and seller, fabrics intended for this end use should meet all the requirements listed in Table 1 of this specification.
It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and seller.
If any of the requirements in Table 1 are modified by mutual agreement between purchaser and seller, any reference to the specification shall state that: “This fabric meets ASTM Specification D4769, except for the following characteristic(s).”
Where no prepurchase agreement has been reached between the purchaser and seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As stated in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.
The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
1.1 This specification covers woven and warp knitted comforter fabrics, composed of any textile fiber, or mixture of fibers.
1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.
1.3 The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D4769-12 Referenced Document
- ASTM D123 Standard Terminology Relating to Textiles
- ASTM D1424 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
- ASTM D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
- ASTM D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
- ASTM D2905 Standard Practice for Statements on Number of Specimens for Textiles
- ASTM D3786 Standard Test Method for Bursting Strength of Textile Fabricsx2014;Diaphragm Bursting Strength Tester Method
- ASTM D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D6797 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test*， 2024-04-19 Update
- ASTM D7023 Standard Terminology Relating to Home Furnishings
ASTM D4769-12 history
- 2018 ASTM D4769-12(2018)e1 Standard Specification for Woven and Warp Knitted Comforter Fabrics
- 2012 ASTM D4769-12 Standard Specification for Woven and Warp Knitted Comforter Fabrics
- 1988 ASTM D4769-88(2000) Standard Specification for Woven and Warp Knitted Comforter Fabrics
