DIN 906:2012 PDF

Standard No.: DIN 906:2012
Release Date: 2012
Published By: German Institute for Standardization
Status: Be replaced
Replace By: DIN 906 E:2019
Latest: DIN 906:2020-02
Replace: DIN 906:1992 DIN 906:2010

Scope: This standard specifies dimensions,masses and technical delivery conditions for pipe plugs which are intended to be screwed into holes with parallel thread as specified in DIN 158-1,DIN 3858,DIN EN ISO 228-1 and DIN ISO 261.

DIN 906:2012 Referenced Document

DIN 158-1 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 1988-2 Drinking water supply systems; materials, components, appliances, design and installation (DVGW code of practice)
DIN 267-2 Fasteners - Technical specification, surface roughness for product classes A and B*， 2017-06-01 Update
DIN 34824 12 point socket for bolts and screws*， 2020-10-01 Update
DIN 3858 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN EN 10263-2 *， 2018-02-01 Update
DIN EN 10277-3 Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels; English version of DIN EN 10277-3:2008-06
DIN EN 12476 Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000
DIN EN 26157-3 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN EN 28839 Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN EN ISO 10664 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014); German version EN ISO 10664:2014*， 2015-01-01 Update
DIN EN ISO 10683 Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018); German version EN ISO 10683:2018*， 2018-11-01 Update
DIN EN ISO 225 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010
DIN EN ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
DIN EN ISO 3269 Fasteners - Acceptance inspection (ISO 3269:2019); German version EN ISO 3269:2019*， 2020-01-01 Update
DIN EN ISO 3506-1 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020*， 2020-08-01 Update
DIN EN ISO 4042 Fasteners - Electroplated coating systems (ISO 4042:2022); German version EN ISO 4042:2022*， 2022-11-01 Update
DIN EN ISO 4759-1 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000

DIN 906:2012 history

2020 DIN 906:2020-02 Internal drive pipe plugs - Conical thread
2020 DIN 906:2020 Internal drive pipe plugs - Conical thread
1970 DIN 906 E:2019-02 Internal drive pipe plugs .Conical thread
2019 DIN 906 E:2019 Draft Document - Internal drive pipe plugs - Conical thread
2012 DIN 906:2012 Internal drive pipe plugs .Conical thread
1992 DIN 906:1992 Hexagon socket pipe plugs
1970 DIN 906:1973 Internal drive pipe plugs .Conical thread

Internal drive pipe plugs .Conical thread

DIN 906:2012Internal drive pipe plugs .Conical thread

DIN 906:2012 Referenced Document

DIN 906:2012 history

DIN 906:2012
Internal drive pipe plugs .Conical thread