DIN 908:2012
Internal drive screw plugs with collar.Cylindrical thread

Standard No.
DIN 908:2012
Release Date
2012
Published By
German Institute for Standardization
Status
Replace By
DIN 908 E:2019
Latest
DIN 908 Berichtigung 1:2021-11
Replace
DIN 908:1992 DIN 908:2010
Scope
This standard specifies dimensions,masses and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13-5,DIN 13-6 or DIN 13-7,and DIN EN ISO 228-1.

DIN 908:2012 Referenced Document

  • DIN 13-5 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
  • DIN 13-6 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
  • DIN 13-7 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
  • DIN 267-2 Fasteners - Technical specification, surface roughness for product classes A and B*， 2017-06-01 Update
  • DIN 34824 12 point socket for bolts and screws*， 2020-10-01 Update
  • DIN 3852-1 Stud ends and ports of fittings, valves and plug screws - Part 1: Dimensions for metric fine pitch thread*， 2014-05-01 Update
  • DIN 3852-2 Stud ends and ports of fittings, valves and plug screws - Part 2: Dimensions for pipe thread*， 2014-05-01 Update
  • DIN 7603 Sealing rings
  • DIN 962 Bolts, screws, studs and nuts - Designations, types and finishes*， 2013-04-01 Update
  • DIN EN 10263-2 *， 2018-02-01 Update
  • DIN EN 10277-3 Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels; English version of DIN EN 10277-3:2008-06
  • DIN EN 12476 Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000
  • DIN EN 26157-3 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
  • DIN EN 28839 Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
  • DIN EN ISO 225 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010
  • DIN EN ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
  • DIN EN ISO 3269 Fasteners - Acceptance inspection (ISO 3269:2019); German version EN ISO 3269:2019*， 2020-01-01 Update
  • DIN EN ISO 3506-1 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020*， 2020-08-01 Update
  • DIN EN ISO 4042 Fasteners - Electroplated coating systems (ISO 4042:2022); German version EN ISO 4042:2022*， 2022-11-01 Update

DIN 908:2012 history

Internal drive screw plugs with collar.Cylindrical thread


Copyright ©2024 All Rights Reserved