ASTM D7395-07(2012)
Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- Standard No.
- ASTM D7395-07(2012)
- Release Date
- 2007
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D7395-18
- Latest
- ASTM D7395-18(2023)
- Scope
This test has been used to measure viscosities of automotive topcoats in place of No. 4 Ford cup measurements and has provided an equivalent ability to evaluate whether the paint meets specifications and is sprayable.
The method could be considered as an alternative to No. 4 Ford cup and other efflux cup measurements for other products as well.
The type of viscometer described in this method gives better temperature control than Ford and other efflux cups and is expected to give better precision.
This test method is suitable for all paints and related materials whether they are Newtonian in behavior or not.
1.1 This test method covers the determination of the viscosity of paints and related products using a cone/plate viscometer at a shear rate of 500 s-1.
1.2 Viscosity values obtained by this method may be used as an alternative to results from No. 4 Ford cup measurements. The values from this method do not replicate Ford cup results, but can be used for quality control, producer-user specifications and viscosity reduction in the same manner that Ford cups are used.
1.3 If viscosity at a higher shear rate is needed, Test Method D4287, which describes viscosity measurement at 10 000 to 12 000 s-1 may be used.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D7395-07(2012) Referenced Document
- ASTM D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
- ASTM D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D7395-07(2012) history
- 2023 ASTM D7395-18(2023) Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- 2018 ASTM D7395-18 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- 2007 ASTM D7395-07(2012) Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- 2007 ASTM D7395-07 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
