IEC 60061-3:1969/AMD44:2011
Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 3:Gauges
- Standard No.
- IEC 60061-3:1969/AMD44:2011
- Release Date
- 2011
- Published By
- International Electrotechnical Commission (IEC)
- Status
- 2011-11
- Replace By
- IEC 60061-3:1969/AMD45:2011
- Latest
- IEC 60061-3:1969/AMD60:2024
- Scope
- This amendment has been prepared by subcommittee 34B: Lamp caps and holders, of IEC technical committee 34: Lamps and related equipment. The text of this amendment is based on the following documents: Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
IEC 60061-3:1969/AMD44:2011 history
- 2024 IEC 60061-3:1969/AMD60:2024 Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2023 IEC 60061-3:1969/AMD59:2023 Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2020 IEC 60061-3:1969/AMD58:2020 Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2020 IEC 60061-3:1969/AMD57:2020 Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2019 IEC 60061-3:1969/AMD56:2019 Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.44)
- 2018 IEC 60061-3:1969/AMD55:2018 Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2017 IEC 60061-3:1969/AMD54:2017 Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2017 IEC 60061-3:1969/AMD53:2017 Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2016 IEC 60061-3:1969/AMD52:2016 Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2015 IEC 60061-3:1969/AMD51:2015 Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2015 IEC 60061-3:1969/AMD50:2015 Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2014 IEC 60061-3:1969/AMD49:2014 Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.44)
- 2014 IEC 60061-3:1969/AMD48:2014 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 3:Gauges
- 2013 IEC 60061-3:1969/AMD47:2013 Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.47)
- 2012 IEC 60061-3:1969/AMD46:2012 Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.44)
- 2011 IEC 60061-3:1969/AMD45:2011 Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
- 2011 IEC 60061-3:1969/AMD44:2011 Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety.Part 3:Gauges
- 2011 IEC 60061-3:1969/AMD43:2011 Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2010 IEC 60061-3:1969/AMD42:2010 Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2010 IEC 60061-3:1969/AMD41:2010 Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.34; Consolidated Reprint)
- 2009 IEC 60061-3:1969/AMD40:2009 Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2009 IEC 60061-3:1969/AMD39:2009 Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2007 IEC 60061-3:1969/AMD38:2007 Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2006 IEC 60061-3:1969/AMD37:2006 Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2006 IEC 60061-3:1969/AMD36:2006 Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.0)
- 2005 IEC 60061-3:1969/AMD35:2005 Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 0000 IEC 60061-3:2005 CSV
- 2004 IEC 60061-3:1969/AMD34:2004 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 34
- 2004 IEC 60061-3:1969/AMD33:2004 Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2004 IEC 60061-3:2004 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.33)
- 2003 IEC 60061-3:1969/AMD32:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 32
- 2003 IEC 60061-3:1969/AMD31:2003 Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges
- 2003 IEC 60061-3:1969/AMD30:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 30
- 2003 IEC 60061-3:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2002 IEC 60061-3:1969/AMD29:2002 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 29
- 2002 IEC 60061-3:1969/AMD28:2002 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 28
- 2002 IEC 60061-3:1969/AMD27:2002 Amendment 27 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.0)
- 2002 IEC 60061-3:2002 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2001 IEC 60061-3:1969/AMD26:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 26
- 2001 IEC 60061-3:1969/AMD25:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 25
- 2001 IEC 60061-3:1969/AMD24:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 24
- 2001 IEC 60061-3:2001 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- 2000 IEC 60061-3:1969/AMD23:2000 Amendment 23 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges (Edition 3.0)
- 1999 IEC 60061-3:1969/AMD22:1999 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 22
- 1999 IEC 60061-3:1969/AMD21:1999 Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
- 1998 IEC 60061-3:1969/AMD20:1998 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges; Amendment 20
- 1969 IEC 60061-3:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3 : Gauges
