SAE AS5878-2005
Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 Degrees F, 180,000 psi, UNJ Thread Procurement Specification

Standard No.

SAE AS5878-2005

Release Date

2005

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AS5878-2018

Latest

SAE AS5878-2018

Scope

This specification establishes the requirements for the following types of self-locking nuts in thread diameter sizes 0.1380 through 0.6250 inches:

SAE AS5878-2005 Referenced Document

• ASME B46.1-2002 Surface texture (surface roughness, waviness, and lay)*， 2024-04-18 Update
• ASTM D3951-98 Standard Practice for Commercial Packaging
• ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness*， 2024-04-18 Update
• ASTM E1417-05 Standard Practice for Liquid Penetrant Testing*， 2024-04-18 Update
• NAS3353 FIXTURE@ BEARING SURFACE SQUARENESS TEST@ SELF-LOCKING NUTS (Rev 1)*， 2011-12-22 Update
• NASM1312-6 FASTENER TEST METHODS@ METHOD 6@ HARDNESS (Rev 1)*， 2013-01-31 Update
• SAE AMS5525 STEEL SHEET AND STRIP, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2Ti - 0.3V
• SAE AMS5708 ALLOY BARS AND FORGINGS@ CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution Heat Treated@ 1975 F (1079.4 C)Treatment consumable Electrode or Vacuum Induction Melted
• SAE AMS5709 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al Solution, Stabilization, and Precipitation Heat Treated. 1975 F (1079.4 C) Treatment Consumable Electrode or Vacuum Induction Melted
• SAE AS1310B-1996 Fastener Torque for Threaded Applications, Definitions of
• SAE AS1701C-2000 Lubricant, Solid Film
• SAE AS5447-2000 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination*， 2024-04-18 Update
• SAE AS870 WRENCHING CONFIGURATION, 12 POINT THREADED FASTENERS
• SAE AS8879-1996 Screw Threads - UNJ Profile@ Inch
• SAE AS954 DESIGN DATA AND STANDARDIZATION of THIN WALL 12-POINT SOCKETS AND BOX WRENCHES for AEROSPACE ENGINE USE
• SAE AS954E-1994 Wrenches, Hand Twelve Point High Strength, Thin Wall

SAE AS5878-2005 history

• 2018 SAE AS5878-2018 Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 °F, 180,000 psi, UNJ Thread Procurement Specification
• 2005 SAE AS5878-2005 Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 Degrees F, 180,000 psi, UNJ Thread Procurement Specification