GB 11640-2011
Seamless aluminum alloy gas cylinders (English Version)
- Standard No.
- GB 11640-2011
- Language
- Chinese, Available in English version
- Release Date
- 2011
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2021-11
- Replace By
- GB/T 11640-2021
- Latest
- GB/T 11640-2021
- Replace
- GB/T 11640-2001
- Scope
- This standard specifies the type and parameters, technical requirements, test methods and qualification standards, inspection rules and marking, coating, packaging, transportation and storage requirements of aluminum alloy seamless gas cylinders (hereinafter referred to as aluminum cylinders). This standard is applicable to the design and manufacture of aluminum cylinders with a nominal working pressure not greater than 30MPa, a nominal volume not greater than 50L, and a service temperature of -40°C to 60°C, which can be refilled with permanent gas or liquefied gas.
GB 11640-2011 Referenced Document
- GB 7144 Coloured cylinder mark for gases
- GB 8335 Special threads for gas cylinders
- GB/T 12137 Methods for leakage test of gas cylinders*， 2015-12-10 Update
- GB/T 13005 Terminology of gas cylinders
- GB/T 191 Packaging.Pictorial marking for handling of goods
- GB/T 192 General purpose metric screw threads--Basic profile
- GB/T 196 General purpose metric screw threads--Basic dimensions
- GB/T 197 General purpose metric screw threads—Tolerances*， 2018-03-15 Update
- GB/T 228.1-2010 Metallic materials.Tensile testing.Part 1: Method of test at room temperature
- GB/T 230.1 Metallic materials.Rockwell hardness test.Part 1:Test method*， 2018-05-14 Update
- GB/T 231.1 Metallic materials—Brinell hardness test—Part 1: Test method*， 2018-05-14 Update
- GB/T 232 Metallic materials - Bend test methods*， 2024-03-15 Update
- GB/T 3191 Extrusion rods and bars of aluminium and aluminium alloys*， 2019-06-04 Update
- GB/T 3246.1 Methods for structural examination of deformed aluminum and aluminum alloy products Part 1: Microstructural examination methods*， 2024-03-15 Update
- GB/T 3246.2 Inspection method for structure of wrought aluminum and aluminum alloy products.Part 2:Inspection method for macrostructure*， 2012-12-31 Update
- GB/T 3880.1 Aluminum and aluminum alloy plates and strips for general industrial use Part 1: General requirements*， 2023-09-07 Update
- GB/T 3880.2 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering.Part 2:Mechanical properties*， 2012-12-31 Update
- GB/T 3880.3 Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering.Part 3:Tolerances on forms and dimensions*， 2012-12-31 Update
- GB/T 3934 Specification of gauges for general purpose screw threads
- GB/T 4437.1 Aluminum and aluminum alloy hot extruded tubes Part 1: Seamless round tubes*， 2023-11-27 Update
- GB/T 6519 Ultrasonic inspection method for deformed aluminum and magnesium alloy products*， 2024-03-15 Update
- GB/T 8336 Special thread gauges for gas cylinders
- GB/T 9251 Methods for hydrostatic test of gas cylinders*， 2022-03-09 Update
- GB/T 9252 Method for pressure cycling test of gas cylinders*， 2017-10-14 Update
GB 11640-2011 history
- 2021 GB/T 11640-2021 Seamless aluminum alloy gas cylinders
- 2011 GB 11640-2011 Seamless aluminum alloy gas cylinders
- 2001 GB/T 11640-2001 Seamless aluminium alloy gas cylinder
GB 11640-2011 Seamless aluminum alloy gas cylinders has been changed from GB/T 11640-2001 Seamless aluminium alloy gas cylinder.
