ISO 6224:2011
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification

Standard No.

ISO 6224:2011

Release Date

2011

Published By

International Organization for Standardization (ISO)

Status

Be replaced

Replace By

ISO 6224:2024

Latest

ISO 6224:2024

Scope

This International Standard specifies the requirements for general-purpose textile-reinforced thermoplastics water-discharge hoses. — ambient temperatures: −10 °C to +60 °C; — water temperature during operation: 0 °C to +60 °C. NOTE Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: At water temperatures above 23 °C and particularly above 40 °C, the maximum working pressure will be reduced. These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as fire-fighting hoses, for special agricultural machines or as gardening hoses for the consumer market.

ISO 6224:2011 Referenced Document

• ISO 10619-1 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature*， 2017-12-15 Update
• ISO 10619-2 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures*， 2021-05-31 Update
• ISO 1307 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
• ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing*， 2021-03-31 Update
• ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method
• ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
• ISO 3 Preferred numbers; Series of preferred numbers
• ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
• ISO 4671 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies*， 2022-03-21 Update
• ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics*， 2012-02-01 Update
• ISO 8033 Rubber and plastics hoses - Determination of adhesion between components*， 2016-12-01 Update
• ISO 8330 Rubber and plastics hoses and hose assemblies — Vocabulary*， 2022-03-28 Update
• ISO 8331 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance*， 2016-11-01 Update

ISO 6224:2011 history

• 2024 ISO 6224:2024 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
• 2011 ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification
• 2005 ISO 6224:2005 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification
• 1995 ISO 6224:1995 Plastics hoses, textile-reinforced, for general-purpose water applications - Specification
• 1981 ISO 6224:1981 Plastics hoses, textile-reinforced, for water; Specification