EN 498:2012
Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included

Standard No.
EN 498:2012
Release Date
2012
Published By
European Committee for Standardization (CEN)
Latest
EN 498:2012
Replace
EN 498-1997
Scope
This European Standard specifies the constructional and performance characteristics, safety specifications, relevant test methods and marking of barbecues burning liquefied petroleum gas, referred to in the body of the text as "appliances".This European Standard covers barbecues as defined in 3.6 and contact grills as defined in 3.8, used outdoors and operating with the gases indicated in 4.1 according to the categories indicated in 4.2. They are fitted with at least one cooking device.This European Standard applies to these appliances and their functional sections whether or not the latter are independent or incorporated into an assembly.This European Standard also applies to appliances designed to be built-in.This European Standard only applies to type testing. Appliances supplied with third family gas at pressures greater those defined in 4.2 are outside the field of application of this European Standard. During the consideration of this text, it was apparent that the concept of thermal efficiency with regard to appliances such as barbecues was not appropriate.This is because: during cooking, there is an additional transfer of heat due to the meat juices falling onto the refractories; there is no relation between the item to be cooked and the useful area; the barbecue is an outdoor appliance in which the action of the wind is important in relation to efficiency. In consequence there is no specific requirement covering thermal efficiency forThis type of appliance.This European Standard does not state all applicable requirements for integral equipments of other nature (for example burners covered by EN 484).

EN 498:2012 Referenced Document

  • EN 10226-1 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
  • EN 10226-2 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • EN 125 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices*2022-10-12 Update
  • EN 126 Multifunctional controls for gas burning appliances*2014-11-01 Update
  • EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements*2018-11-01 Update
  • EN ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000

EN 498:2012 history

  • 2012 EN 498:2012 Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included
  • 1997 EN 498:1997 Specification for Dedicated Liquefied Petroleum Gas Appliances - Barbecues for Outdoor Use



Copyright ©2024 All Rights Reserved