VDI 4479-2011
Transfer car
- Standard No.
- VDI 4479-2011
- Release Date
- 2011
- Published By
- Association of German Mechanical Engineers
- Latest
- VDI 4479-2011
- Replace
- VDI 4479-2008
- Scope
- This guideline describes the basic structure, mode of operation and typical features of transfer cars. An overview of its various embodiments should give an idea of the wide range of possible uses for this system component and assist in selecting the right type for the task without specifying size, travel parameters, load-bearing capacity or dimensioning. Information about design features for particular conditions of use and about basic principles in calculating cycle times for the usual travel cycles should prove useful in planning and development work. With the aid of an example of calculating a complex travel cycle, the guideline shows how throughput data can be determined and optimization of layout and travel strategy achieved.
VDI 4479-2011 Referenced Document
- DIN EN 1525:1997 Safety of industrial trucks - Driverless trucks and their systems; German version EN 1525:1997
- DIN EN 349:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body(includes Amendment A1:2008); English version of DIN EN 349:2008-09
- DIN EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2005, modified); German version EN 60204-1:2006
- DIN EN 619:2011 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads; German version EN 619:2002+A1:2010
- DIN EN ISO 12100-1/A1:2009 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology - Amendment 1 (ISO 12100-1:2003/Amd 1:2009); English version of DIN EN ISO 12100-1:2003/A1:2009-10
- DIN EN ISO 12100-1:2004 Safety of machines – basic terms, general design principles – Part 1: Basic terminology, methodology
- DIN EN ISO 12100-2/A1:2009 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009); English version of DIN EN ISO 12100-2:2003/A1:2009-10
- DIN EN ISO 12100-2:2004 Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003)
- DIN EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008); German version EN ISO 13857:2008
VDI 4479-2011 history
- 2011 VDI 4479-2011 Transfer car
- 2008 VDI 4479-2008 Verfahrwagen (Verschiebewagen@ Verteilwagen)
