BS EN ISO 17641-2:2005
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests

Standard No.

BS EN ISO 17641-2:2005

Release Date

2005

Published By

British Standards Institution (BSI)

Status

Be replaced 2015-11

Replace By

BS EN ISO 17641-2:2015

Latest

BS EN ISO 17641-2:2015

Replace

00/709667 DC:2000

Scope

ISO 17641-2:2005 specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: T-joint weld cracking test; weld metal tensile test; longitudinal bend test. The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials. This International Standard applies primarily to fully austenitic stainless steels; nickel, nickel-base and nickel-copper weld metals. It can also be used for other weld metals. ISO 17641-2:2005 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

BS EN ISO 17641-2:2005 history

• 2015 BS EN ISO 17641-2:2015 Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests
• 2005 BS EN ISO 17641-2:2005 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests