ASTM F1987-01(2011)
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
- Standard No.
- ASTM F1987-01(2011)
- Release Date
- 2001
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM F1987-01(2011)
- Scope
1.1 This specification covers requirements for multilayer pipe type 2 and compression fittings for hydronic heating systems, with a maximum pressure/temperature range of 1000 kPa (145 psi), at 82°C (180°F).
Note 18212;Multilayer Pipe Type 2
1.2 Multilayer pipe type 2 is produced using a butt-welded aluminum pipe as a core, with an extruded inside layer of crosslinked polyethylene (PEX). An adhesive layer is used to bond the inside layer to the wall of the aluminum pipe. An outer layer of polyethylene (PE) and an adhesive layer are extruded to the outer wall of the aluminum pipe.
1.3 Multilayer pipe type 2 is produced in Configurations 1 and 2, as shown in Fig. 1.
1.4 This specification includes compression fittings, which are referenced in Fig. 2.
1.5 Specifications for threaded or solder adapters for use with pipe and fittings meeting the requirements of this specification are given in Annex A1 and Annex A2.
1.6 The following safety hazards caveat pertains only to the test method portion of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
ASTM F1987-01(2011) Referenced Document
- ASTM B283 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
- ASTM B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
- ASTM B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube*， 2024-04-19 Update
- ASTM B584 Standard Specification for Copper Alloy Sand Castings for General Applications
- ASTM D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
- ASTM D1600 Standard Terminology for Abbreviated Terms Relating to Plastics
- ASTM D1898
- ASTM D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
- ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials*， 2024-04-19 Update
- ASTM D3418 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM D5033 Standard Guide for Development of ASTM Standards Relating to Recycling and Use of Recycled Plastics
- ASTM D618 Standard Practice for Conditioning Plastics for Testing
- ASTM F412 Standard Terminology Relating to Plastic Piping Systems
- ASTM F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ISO 10508 Plastics piping systems for hot and cold water installations — Guidance for classification and design AMENDMENT 1
ASTM F1987-01(2011) history
- 2001 ASTM F1987-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
- 2001 ASTM F1987-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
- 2001 ASTM F1987-01 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
- 2000 ASTM F1987-00a Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
