This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.This European Standard is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.This part 1 describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1. Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in EN 1501-5.This European Standard is not applicable to: operation in severe conditions, e. g. extreme environmental conditions such as: below- 25 ℃ and above + 40 ℃ temperatures; tropical environment; wind velocity in excess of 75 km/h; contaminating environment; corrosive environment; operation in potentially explosive atmospheres; handling of loads the nature of which could lead to dangerous situations (e. g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives); operation on ships.This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.
EN 1501-1:2011 history
2021EN 1501-1:2021 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
2015EN 1501-1:2011+A1:2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
2011EN 1501-1:2011 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (Incorporates Amendment A1: 2015)
1998EN 1501-1:1998 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles Incorporates Amendment A2: 2009