ASTM E1637-98(2011)
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- Standard No.
- ASTM E1637-98(2011)
- Release Date
- 1998
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E1637-98(2017)e1
- Latest
- ASTM E1637-98(2017)e1
- Scope
1.1 This specification covers the design, construction, and weatherability of structural standing seam aluminum roof panel systems. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers.
Note 18212;These systems are used on both low-slope and steep-slope roof applications. They also are used with or without an underlying deck or sheathing.
1.2 The objective of this specification is to provide for the overall performance of the structural standing seam aluminum roof panel system as defined in 3.2.6 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide for periodic maintenance of the equipment by the building owner.
1.3 In addition to structural characteristics, the specifier shall evaluate other characteristics beyond the scope of this specification that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for the specifier''s checklist.
1.4 This specification is not intended to exclude products or systems not covered by the referenced documents.
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.6 The text of this specification contains notes and footnotes that provide explanatory information and are not requirements of this specification.
ASTM E1637-98(2011) Referenced Document
- ASTM B209 Standard Specification for Aluminum and Aluminum- Alloy Sheet and Plate
- ASTM C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
- ASTM C879 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
- ASTM D1667 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
- ASTM D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials*， 2023-01-01 Update
- ASTM E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
- ASTM E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference*， 2018-11-01 Update
- ASTM E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
- ASTM E631 Standard Terminology of Building Constructions
- ASTM G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E1637-98(2011) history
- 2017 ASTM E1637-98(2017)e1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- 1998 ASTM E1637-98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- 1998 ASTM E1637-98(2003) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- 1998 ASTM E1637-98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
