SAE AMS3726E-2011
Shims, Filled Resin Compound

Standard No.
SAE AMS3726E-2011
Release Date
2011
Published By
Society of Automotive Engineers (SAE)
Latest
SAE AMS3726E-2011
Scope
This specification covers filled, thermosetting resin compounds capable of being applied and cured in place between the surfaces of mechanically fastened (joined) structures. These products have been typically used as molded shims during assembly of aircraft components and parts requiring good flatwise compression properties and adhesion to metallic or nonmetallic materials, but usage is not limited to such applications. In most applications, the compound will be required to adhere to only one of the mating surfaces; i.e., the compound is not intended to be an adhesive. Each application should be considered individually.

SAE AMS3726E-2011 Referenced Document

  • ASTM B117-09 Standard Practice for Operating Salt Spray (Fog) Apparatus*， 2024-04-19 Update
  • ASTM B117-11 Standard Practice for Operating Salt Spray (Fog) Apparatus*， 2024-04-19 Update
  • ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)*， 2024-04-19 Update
  • ASTM D1151-00 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds*， 2024-04-19 Update
  • ASTM D2240-05 Standard Test Method for Rubber Property8212;Durometer Hardness*， 2024-04-19 Update
  • ASTM D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies*， 2024-04-19 Update
  • ASTM D696-08 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer*， 2024-04-19 Update
  • ASTM D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement*， 2024-04-19 Update
  • SAE AMS-QQ-A-250/4-1997 Aluminum Alloy 2024@ Plate and Sheet (UNS A92024)
  • SAE AMS3091 MOLD RELEASE AGENT
  • SAE AMS3167-1996 Solvents@ Cleaning for Cleaning Prior to Application of Primer and Top Coat Materials
  • SAE AMS3667 POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
  • SAE AMS3894/2 GRAPHITE FIBER TAPE AND SHEET Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 350 (177)
  • SAE ARP1524 SURFACE PREPARATION AND PRIMING OF ALUMINUM ALLOY PARTS FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING Phosphoric Acid Anodizing

SAE AMS3726E-2011 history

Shims, Filled Resin Compound


Copyright ©2024 All Rights Reserved