BS EN 61076-2-001:2011 PDF

Scope: This blank detail product specification is a supplementary document to the sectional product specification IEC 61076-2 and contains requirements for style, layout and content of detail product specifications for circular connectors. It should be used in conjunction with the following publications: IEC 61076-1 and IEC 61076-2 for product requirements as well as IEC 62197-1 for quality requirements. The main content of this blank detail product specification is divided into two parts: on one page the example for a blank detail product specification, on the other page the guidance notes referring to the example. The guidance notes have the same numbering as the relevant paragraphs of the example pages. The sample pages can be used like a template when preparing a detail product specification within the scope of this document. This document is not intended to replace the templates and guidance notes of IEC, but to assist in their application. All users are reminded to adhere to relevant directives and guidelines of the IEC when preparing a standard. NOTE 1 A detail quality specification IEC 62197-2-1xx should be prepared, based on the blank detail quality specification for circular connectors IEC 62197-2-001 and its references and should be used in conjunction with the detail product specification IEC 61076-2-1xx. NOTE 2 The quality assessment requirements for connectors according to the IEC 61076 series are detailed in IEC 62197-1.

BS EN 61076-2-001:2011 Referenced Document

IEC 60068-1 Environmental testing - Part 1: General and guidance*， 2013-10-01 Update
IEC 60352 Solderless wrapped connections - General requirements, test methods and practical guidance
IEC 60512 Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 9: miscellaneous tests
IEC 60512-1 Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification*， 2018-10-22 Update
IEC 60999-1 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm<(hoch)2> up to 35 mm<(hoch)2>
IEC 60999-2 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors from 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included)
IEC 62197-1 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

2011 BS EN 61076-2-001:2011 Connectors for electronic equipment. Product requirements. Circular connectors. Blank detail specification
2002 BS EN 61076-2-001:2002 Connectors for electronic equipment - Circular connectors - Blank detail specification