BS EN 61000-4-15:2011
Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications

Standard No.
BS EN 61000-4-15:2011
Release Date
2011
Published By
British Standards Institution (BSI)
Status
Replace By
BS EN 61000-4-15:2011(2012)
Latest
BS EN 61000-4-15:2011(2012)
Replace
99/245379 DC-1999 BS EN 61000-4-15:1998
Scope
This part of IEC 61000 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity.

BS EN 61000-4-15:2011 Referenced Document

  • IEC 60068 Basic climatic and mechanical robustness testing procedure for components
  • IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection*2021-03-25 Update
  • IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements*2017-01-01 Update
  • IEC 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements*2020-10-26 Update

BS EN 61000-4-15:2011 history

  • 0000 BS EN 61000-4-15:2011(2012)
  • 2011 BS EN 61000-4-15:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications



Copyright ©2024 All Rights Reserved