BS EN 61242:1997+A1:2008
Electrical accessories. Cable reels for household and similar purposes

Standard No.
BS EN 61242:1997+A1:2008
Release Date
1998
Published By
British Standards Institution (BSI)
Status
 2018-03
Replace By
BS EN 61242:1997+A13:2017
Latest
BS EN 61242:1997+A13:2017
Replace
84/29363 DC BS EN 61242:1998
Scope
This International Standard applies to cable reels for a.c. only, with a rated voltage above 50 V and not exceeding 250 V for single-phase cable reels and above 50 V and not exceeding 440 V for all other cable reels, and a rated current not exceeding 16 A. They are intended for household, commercial and light industrial and similar purposes, either indoors or outdoors, with particular reference to safety in normal use. This standard does not apply to: — cable reeling devices incorporated in appliances or luminaires; — cable reeling devices associated with appliances or luminaires. This standard may be used as a guide for cable reeling devices incorporated or associated in appliances or luminaires as far as it is applicable. Cable reels complying with this standard are suitable for use at ambient temperatures not normally exceeding 25 °C, but occasionally reaching 35 °C. In locations where special conditions prevail, special construction may be required.

BS EN 61242:1997+A1:2008 Referenced Document

  • IEC 60227 Corrigendum 1 - Polyvinyl chloride insulated flexible cables and cords with circular conductors and a rated voltage not exceeding 750 V
  • IEC 60245 Corrigendum 1 - Rubber insulated flexible cables and cords with circular conductors and a rated voltage not exceeding 750 V
  • IEC 60417 
  • IEC 60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls*2024-04-19 Update
  • IEC 60884 Plugs and socket-outlets for household and similar purposes - Part 3-1: Particular requirements for socket-outlets incorporating USB power supply*2021-10-01 Update
  • IEC 60999 Connecting Devices - Safety Requirements for Screw-Type and Screwless-Type Clamping Units for Electrical Copper Conductors (Edition 1.0; CENELEC EN 60999: 1993; Corrigendum-1995)
  • ISO 1456:2003 Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium*2003-02-01 Update
  • ISO 2081:1986 Metallic coatings; Electroplated coatings of zinc on iron or steel
  • ISO 2093:1986 Electroplated coatings of tin; Specification and test methods

BS EN 61242:1997+A1:2008 history




Copyright ©2024 All Rights Reserved