GB/T 26750-2011
Sanitary ware.Pressure assistant water flushing devices (English Version)

Standard No.

GB/T 26750-2011

Language

Chinese, Available in English version

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 26750-2011

Scope

This standard specifies the terms and definitions, product classification, materials and spare parts, technical requirements, test methods, inspection rules, signs and identification, packaging, transportation and storage of pressure flushing devices for toilets. This standard applies to flushing devices with water supply pressure installed on water supply pipelines with a static pressure not greater than 0.6MPa and used in conjunction with various toilets.

GB/T 26750-2011 Referenced Document

• GB 14536.1 Automatic electrical controls for household and similar use.Part 1:General requirements
• GB 6952 Sanitary wares*， 2015-09-11 Update
• GB/T 10125-1997 Corrosion tests in artificial atmospheres--Salt spray tests
• GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
• GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
• GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
• GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
• GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
• GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
• GB/T 9195 Architectural sanitary ceramics terminology and classification*， 2023-11-27 Update
• GB/T 9286-1998 Paints and varnishes--Cross cut test for films

GB/T 26750-2011 history

• 2011 GB/T 26750-2011 Sanitary ware.Pressure assistant water flushing devices