ASTM D7001-06(2011)
Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- Standard No.
- ASTM D7001-06(2011)
- Release Date
- 2006
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D7001-20
- Latest
- ASTM D7001-20
- Scope
1.1 This specification covers geocomposite drainage panels used in highway, turf, and other high volume subsurface drainage applications. These products consist of a geotextile wrapped around a polymer core. These products are a minimum of 25 mm (1 in.) thick and are available in 150 mm (6 in.), 300 mm (12 in.), 450 mm (18 in.), and 600 mm (24 in.) widths.
1.2 The requirements of this specification are intended to provide a subsurface drainage geocomposite suitable for drainage of surface and subsurface water, sewerage, and leachates. Products produced in accordance with this specification and intended for pavement drainage applications shall be installed in accordance with Practice D6088.
1.3 The values as stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
ASTM D7001-06(2011) Referenced Document
- ASTM D1777 Standard Test Method for Thickness of Textile Materials
- ASTM D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials*， 2024-04-19 Update
- ASTM D4354 Standard Practice for Sampling of Geosynthetics for Testing
- ASTM D4355 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
- ASTM D4439 Standard Terminology for Geosynthetics
- ASTM D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
- ASTM D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM D4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
- ASTM D4716 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head*， 2024-04-19 Update
- ASTM D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile
- ASTM D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products*， 2024-04-19 Update
- ASTM D6088 Standard Practice for Installation of Geocomposite Pavement Drains
- ASTM D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
- ASTM D6364 Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics
- ASTM D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
ASTM D7001-06(2011) history
- 2020 ASTM D7001-20 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- 2006 ASTM D7001-06(2011) Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- 2006 ASTM D7001-06 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- 2005 ASTM D7001-05 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- 2004 ASTM D7001-04 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
