GB/T 26561-2011
Counterbalanced trucks handling freight containers of 6 m length and above.Additional stability tests (English Version)

Standard No.
GB/T 26561-2011
Language
Chinese, Available in English version
Release Date
2011
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status
 2019-02
Replace By
GB/T 26949.9-2018
Latest
GB/T 26949.9-2018
Scope
This standard specifies additional tests for verifying the stability of counterbalanced forklifts handling freight containers of 6 m or more in length. This standard specifies additional tests other than those listed in GB/T 5141. The stability tests specified in this standard are intended to ensure that counterbalanced forklifts for handling freight containers have sufficient stability for reasonable and proper use under the following conditions. a) Forklifts operate under the condition that the wind speed does not exceed 12.2m/s (Beaufort wind scale 6) (operating and stacking freight containers at the specified operating height); b) When the wind speed exceeds 12.2m/s, the wind force should be within Substituting the value of wind speed v into the formulas (1) and (2) in 3.5.3 to calculate; c) The forklift runs forward, the freight container is front and lifted until its bottom surface is higher than the maximum compression point on the driver’s seat cushion and The distance is not more than 1m, and the mast is fully tilted backward. Stability tests that meet the conditions described in a) or b) above apply to all forklifts. Stability tests that meet the conditions described in c) above are only applicable to forklifts that require partial lifting of the container during operation. This standard does not apply to forklifts used under the following conditions: - Handling suspended loads that can swing freely; - Handling containers with a movable center of gravity (see GB/T 17382).

GB/T 26561-2011 Referenced Document

  • GB/T 17382 Series 1 container handling and bolting*2023-11-27 Update
  • GB/T 5141 Counterbalanced fork-lift trucks-Stability test
  • ISO 1496-2 Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk — Amendment 1: 1AAA and 1BBB containers*2018-11-23 Update
  • ISO 3691-1 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2

GB/T 26561-2011 history

  • 2018 GB/T 26949.9-2018 Industrial trucks.Verification of stability.Part 9:Counterbalanced trucks with mast handling freight containers of 6 m length and longer
  • 2011 GB/T 26561-2011 Counterbalanced trucks handling freight containers of 6 m length and above.Additional stability tests

GB/T 26561-2011 Counterbalanced trucks handling freight containers of 6 m length and above.Additional stability tests was changed to GB/T 26949.9-2018 Industrial trucks.Verification of stability.Part 9:Counterbalanced trucks with mast handling freight containers of 6 m length and longer.

Counterbalanced trucks handling freight containers of 6 m length and above.Additional stability tests



Copyright ©2024 All Rights Reserved