DIN EN ISO 28927-10:2011 PDF

Standard No.: DIN EN ISO 28927-10:2011
Release Date: 2011
Published By: German Institute for Standardization
Status: Be replaced
Replace By: DIN EN ISO 28927-10:2011-07
Latest: DIN EN ISO 28927-10:2011-07
Replace: DIN EN 28662-2:1995 DIN EN 28662-3:1995 DIN EN 28662-5:1995 DIN EN 28662-100:2002 DIN EN ISO 28927-10:2009

Scope: This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action (portable rock drills, plug hole drills, rotary hammers, breakers (e. g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers, or similar). It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with an inserted too bit. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven penumatically or by other means, intended for making holes in hard materials like rock and concrete. It also applies to breakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) and for hammers intend to work in any direction to perform riveting or chiselling work. It is not applicable to type impact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack leg type rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but by an additional device). It is intended that results be used to compare different models of the same type of machine.

DIN EN ISO 28927-10:2011 Referenced Document

EN 12096 Mechanical vibration - Declaration and verification of vibration emission values
ISO 17066 Hydraulic tools - Vocabulary
ISO 20643:2005 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission
ISO 2787 Rotary and percussive pneumatic tools; performance tests
ISO 5349 Mechanical vibration; Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration
ISO 5391:2003 Pneumatic tools and machines - Vocabulary

2011 DIN EN ISO 28927-10:2011-07 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011); German version EN ISO 28927-10:2011
2011 DIN EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011); German version EN ISO 28927-10:2011
0000 DIN EN ISO 28927-10:2009
0000 DIN EN 28662-100:2002
0000 DIN EN 28662-5:1995