ISO/IEC 14443-3:2011
Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision

Standard No.
ISO/IEC 14443-3:2011
Release Date
2011
Published By
International Organization for Standardization (ISO)
Status
Replace By
ISO/IEC 14443-3:2011/Amd 1:2011
Latest
ISO/IEC 14443-3:2018/Amd 1:2021
Scope
This part of ISO/IEC 14443 describes: - polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); - the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; - the initial Request and Answer to Request command content; - methods to detect and communicate with one PICC among several PICCs (anticollision); - other parameters required to initialize communications between a PICC and PCD; - optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria. Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4. This part of ISO/IEC 14443 is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2). NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443-2. NOTE 2 Test methods for this International Standard are defined in ISO/IEC 10373-6.

ISO/IEC 14443-3:2011 Referenced Document

  • ISO/IEC 13239 Information technology - Telecommunications and information exchange between systems - High-level data link control (HDLC) procedures
  • ISO/IEC 14443-2 Corrigendum 2 - Cards and security devices for personal identification - Contactless proximity objects - Part 2: Radio frequency power and signal interface
  • ISO/IEC 14443-4 Cards and security devices for personal identification — Contactless proximity objects — Part 4: Transmission protocol — Amendment 3: Time binding of PICC to PCD data interchange for enhanced detection of relay attacks
  • ISO/IEC 7816-4:2005 Identification cards - Integrated circuit cards - Part 4: Organization, security and commands for interchange
  • ISO/IEC 7816-6 Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange — Amendment 1: Quantum safe cryptography*， 2023-10-01 Update

ISO/IEC 14443-3:2011 history

  • 2021 ISO/IEC 14443-3:2018/Amd 1:2021 Amendment 1 - Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision - Dynamic power level management
  • 2020 ISO/IEC 14443-3:2018/Amd 2:2020 Amendment 2 - Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision - Enhancements for harmonization
  • 2018 ISO/IEC 14443-3:2018 Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
  • 2016 ISO/IEC 14443-3:2016/Amd 1:2016 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 1: RFU handling rules
  • 2016 ISO/IEC 14443-3:2016 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
  • 2014 ISO/IEC 14443-3:2011/Amd 6:2014 Amendment 6 - Identification cards -- Contactless integrated circuit cards -- Proximity cards -- Part 3: Initialization and anticollision - Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
  • 2014 ISO/IEC 14443-3:2011/Amd 3:2014 Amendment 3 - Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - Alternating between PICC and PCD functionalities, and PICC supp
  • 2012 ISO/IEC 14443-3:2011/Amd 2:2012 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 2: Bit rates of fc/8, fc/4 and fc/2, frame size from 512 bytes to 4096 bytes and minimum TR0
  • 2011 ISO/IEC 14443-3:2011/Amd 1:2011 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 1: Electromagnetic disturbance handling and single-size unique identifier
  • 2011 ISO/IEC 14443-3:2011 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
  • 2006 ISO/IEC 14443-3:2001/Amd 3:2006 Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision; Amendment 3: Handling of reserved fields and values
  • 2005 ISO/IEC 14443-3:2001/Amd 1:2005/Cor 1:2006 Identification cards - Contactless integrated circuit(s) cards; Proximity cards - Part 3: Initialization and anticollision; Amendment 1: Bit rates of fc/64, fc/32 and fc/16
  • 2005 ISO/IEC 14443-3:2001/Amd 1:2005 Identification cards — Contactless integrated circuit(s) cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 1: Bit rates of fc/64, fc/32 and fc/16
  • 2001 ISO/IEC 14443-3:2001 Identification cards - Contactless integrated circuit(s) cards; Proximity cards - Part 3: Initialization and anticollision
Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision


Copyright ©2024 All Rights Reserved