ISO 4014:2011
Hexagon head bolts - Product grades A and B
- Standard No.
- ISO 4014:2011
- Release Date
- 2011
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 4014:2022
- Latest
- ISO 4014:2022
- Scope
- This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 and ISO 4759-1.
ISO 4014:2011 Referenced Document
- ISO 10683 Fasteners - Non-electrolytically applied zinc flake coating systems*， 2018-08-01 Update
- ISO 225 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
- ISO 3269 Fasteners — Acceptance inspection*， 2019-07-25 Update
- ISO 3506-1 Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes*， 2020-04-02 Update
- ISO 4017 Fasteners — Hexagon head screws — Product grades A and B*， 2022-06-28 Update
- ISO 4042 Threaded components — Electroplated coatings*， 2024-04-19 Update
- ISO 4053 Measurement of gas flow in conduits; Tracer methods; Part IV : Transit time method using radioactive tracers
- ISO 4759-1 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
- ISO 6157-1 Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements
- ISO 724 ISO general purpose metric screw threads — Basic dimensions*， 2023-04-01 Update
- ISO 8839 Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals
- ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread; Technical Corrigendum 1*， 2013-04-01 Update
- ISO 8992 Fasteners - General requirements for bolts, screws, studs and nuts
- ISO 965-1 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1*， 2021-09-29 Update
ISO 4014:2011 history
- 2022 ISO 4014:2022 Fasteners — Hexagon head bolts — Product grades A and B
- 2011 ISO 4014:2011 Hexagon head bolts - Product grades A and B
- 1999 ISO 4014:1999 Hexagon head bolts - Product grades A and B
- 1988 ISO 4014:1988 Hexagon head bolts; product grades A and B
- 1979 ISO 4014:1979 Hexagon head bolts — Product grades A and B
