IEC 60793-2-10:2011
Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Standard No.

IEC 60793-2-10:2011

Release Date

2011

Published By

International Electrotechnical Commission (IEC)

Status

Be replaced 2017-08

Replace By

IEC 60793-2-10:2015

Latest

IEC 60793-2-10:2019/AMD1:2022

Replace

IEC 86A/1295/CDV:2009 IEC 60793-2-10:2007

Scope

This part of IEC 60793 is applicable to optical fibre types A1a@ A1b@ and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Type A1a fibre is a 50/125 mm graded index fibre. Type A1a.1 applies to 50/125 mm fibre@ while A1a.2 and A1a.3 apply to two bandwidth grades of 850 nm laser-optimised 50/125 mm fibre. Type A1b applies to 62@5/125 mm graded index fibre and A1d applies to 100/140 mm graded index fibre. Other applications include@ but are not restricted to@ the following: short reach@ high bit-rate systems in telephony@ distribution and local networks carrying data@ voice and/or video services; on-premises intra-building and inter-building fibre installations including Data Centres@ LANs@ Storage Area Networks@ PBXs@ video@ various multiplexing uses@ outside telephone cable plant use@ and miscellaneous related uses. Three types of requirements apply to these fibres: ?C general requirements@ as defined in IEC 60793-2; ?C specific requirements common to the category A1 multimode fibres covered in this standard and which are given in Clause 3; ?C particular requirements applicable to individual fibre types or specific applications@ which are defined in the normative family specification annexes.

IEC 60793-2-10:2011 history

• 2022 IEC 60793-2-10:2019/AMD1:2022 Amendment 1 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• 0000 IEC 60793-2-10:2019 RLV
• 2017 IEC 60793-2-10:2017 Fibres optiques – Partie 2-10: Spécifications de produits – Spécification intermédiaire pour les fibres multimodales de catégorie A1 (Edition 6.0)
• 2015 IEC 60793-2-10:2015 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• 2011 IEC 60793-2-10:2011 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• 2007 IEC 60793-2-10:2007 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• 2004 IEC 60793-2-10:2004 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• 2002 IEC 60793-2-10:2002 Optical fibres - Part 2-10: Product specifications; Sectional specification for category A1 multimode fibres