ASTM F1155-10
Standard Practice for Selection and Application of Piping System Materials

Standard No.

ASTM F1155-10

Release Date

2010

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM F1155-10(2015)

Latest

ASTM F1155-10(2019)

Scope

1.1 This practice is intended as a guide to shipbuilders, shipowners, and design agents for use in the preparation of piping system material schedules for commercial ship design and construction.

1.2 The materials and limitations listed in Tables 1-28 meet the minimum requirements of the U.S. Coast Guard and the American Bureau of Shipping and, except for titanium, should be considered to be the minimum acceptable materials in regard to material, design, and testing. This document is not intended to limit the selection of material strictly to those listed. Other equal or superior materials may be used provided that they are acceptable to the regulatory bodies and classification societies.

Note 18212;Titanium has been added as its use in fresh and sea water systems is becoming more common.

ASTM F1155-10 Referenced Document

• ASTM A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
• ASTM A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• ASTM A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
• ASTM A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
• ASTM A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
• ASTM A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
• ASTM A182/A182M Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• ASTM A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
• ASTM A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
• ASTM A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
• ASTM A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
• ASTM A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
• ASTM A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
• ASTM A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel
• ASTM A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
• ASTM A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth
• ASTM A320/A320M Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service
• ASTM A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
• ASTM A351/A351M Standard Specification for Castings, Austenitic, Austenitic- Ferritic (Duplex), for Pressure-Containing Parts
• ASTM A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
• ASTM A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
• ASTM A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
• ASTM A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A536 Standard Specification for Ductile Iron Castings
• ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts*， 2024-04-19 Update
• ASTM B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• ASTM B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
• ASTM B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets*， 2024-04-19 Update
• ASTM B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
• ASTM B367 Standard Specification for Titanium and Titanium Alloy Castings
• ASTM B381 Standard Specification for Titanium and Titanium Alloy Forgings
• ASTM B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube
• ASTM B467 Standard Specification for Welded Copper-Nickel Pipe
• ASTM B61 Standard Specification for Steam or Valve Bronze Castings
• ASTM B62 Standard Specification for Composition Bronze or Ounce Metal Castings
• ASTM B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• ASTM B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe
• ASTM B863 Standard Specification for Titanium and Titanium Alloy Wire
• ASTM B88 Standard Specification for Seamless Copper Water Tube
• ASTM B898 Standard Specification for Reactive and Refractory Metal Clad Plate
• ASTM D2996 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D2997 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
• ASTM F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
• ASTM F1548 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
• ASTM F467 Standard Specification for Nonferrous Nuts for General Use
• ASTM F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• ASTM F682 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
• ASTM F683 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
• ASTM F704 Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
• ASTM F722 Standard Specification for Welded Joints for Shipboard Piping Systems

ASTM F1155-10 history

• 2020 ASTM F1155-10(2019) Standard Practice for Selection and Application of Piping System Materials
• 2010 ASTM F1155-10(2015) Standard Practice for Selection and Application of Piping System Materials
• 2010 ASTM F1155-10 Standard Practice for Selection and Application of Piping System Materials
• 1998 ASTM F1155-98(2004) Standard Practice for Selection and Application of Piping System Materials
• 1998 ASTM F1155-98 Standard Practice for Selection and Application of Piping System Materials