ISO 13680:2010
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
- Standard No.
- ISO 13680:2010
- Release Date
- 2010
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 13680:2020
- Latest
- ISO 13680:2020
- Scope
- WARNING — It is the purchaser's responsibility to specify the product specification level (PSL), corrosion-resistant alloy (CRA) group, category, grade, delivery conditions and any other requirements in addition to those specified herewith to ensure that the product is adequate for the intended service environment. ISO 15156 (all parts) or NACE MR0175/ISO 15156 should be considered when making specific requirements for H2S-containing environment; see Annex G. This International Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: - PSL-1, which is the basis of this International Standard; - PSL-2, which provides additional requirements for a product that is intended to be both corrosion resistant and cracking resistant for the environments and qualification method specified in ISO 15156-3 and Annex G of this International Standard. At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1. NOTE 1 The corrosion-resistant alloys included in this International Standard are special alloys in accordance with ISO 4948-1 and ISO 4948-2. This International Standard is applicable to the following four groups of product: a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure; b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy; c) group 3, which is composed of stainless alloys with an austenitic structure (iron base); d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base). This International Standard contains no provisions relating to the connection of individual lengths of pipe. NOTE 2 The connection or joining method can influence the corrosion performance of the materials specified in this International Standard. NOTE 3 It is necessary to recognize that not all PSL-1 categories and grades can be made cracking resistant in accordance with ISO 15156-3 and are, therefore, not included in PSL-2.
ISO 13680:2010 Referenced Document
- ASNT SNT-TC-1A Personnel Qualification and Certification in Nondestructive Testing*， 2015-10-26 Update
- ISO 10124 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
- ISO 10474 Steel and steel products - Inspection documents*， 2013-07-01 Update
- ISO 10543 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
- ISO 11484 Steel products — Employer's qualification system for non-destructive testing (NDT) personnel*， 2019-04-01 Update
- ISO 11496 Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections
- ISO 12095 Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
- ISO 13665 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
- ISO 14284 Steel and iron — Sampling and preparation of samples for the determination of chemical composition*， 2022-10-25 Update
- ISO 15156-3:2009 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
- ISO 377 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing*， 2017-06-01 Update
- ISO 404 Steel and steel products — General technical delivery requirements — Amendment 1*， 2022-11-01 Update
- ISO 4885 Ferrous materials - Heat treatments - Vocabulary*， 2018-02-01 Update
- ISO 4948-1 Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition
- ISO 4948-2 Steels; Classification; Part 2 : Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
- ISO 525 Bonded abrasive products — Shape types, designation and marking*， 2020-10-12 Update
- ISO 6508-1 Metallic materials — Rockwell hardness test — Part 1: Test method*， 2023-12-13 Update
- ISO 6892-1 Metallic materials — Tensile testing — Part 1: Method of test at room temperature*， 2019-11-15 Update
- ISO 6929 Steel products.Vocabulary*， 2013-11-01 Update
- ISO 783 Metallic materials - Tensile testing at elevated temperature
- ISO 80000-1 Quantities and units - Part 1: General*， 2022-12-06 Update
- ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
- ISO 9303 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
- ISO 9304 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
- ISO 9305 Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections
- ISO 9402 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
- ISO 9598 Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
- NACE MR0175/ISO 15156 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION (ITEM # 21307; Third Edition; Incorporates MR0175/ISO 15156-1, MR0175/ISO 15156-2 and MR0175/ISO 15156-3)*， 2015-01-01 Update
ISO 13680:2010 history
- 2020 ISO 13680:2020 Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
- 2010 ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
- 2008 ISO 13680:2008 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
- 2004 ISO 13680:2000/Cor 2:2004 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
- 2002 ISO 13680:2000/Cor 1:2002 Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Technical Corrigendum 1
- 2000 ISO 13680:2000 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
