EN 14309:2009 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification (Incorporates Amendment A1: 2013)
This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately-180 ℃ to +80 ℃. Modified expanded polystyrene polymers with a higher temperature resistance are also covered byThis standard. NOTE Below an operating temperature of-50 ℃, special tests regarding the suitability of the product in the intended application are advised (e. g. liquefaction of oxygen). Manufacturers' advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, rolls, lags, pipe sections or other prefabricated ware.This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered byThis standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This standard does not specify the required level or class of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(m·K) at 10 ℃ are not covered byThis standard.This standard does not cover products for in situ insulation (for loose fill or poured insulation) or products for the insulation of the building structure.
EN 14309:2009 history
2018EN 14309:2015/PRA1:2018 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
2015EN 14309:2015 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
2009EN 14309:2009 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification (Incorporates Amendment A1: 2013)