BS EN 61935-1:2009
Specification for the testing of balanced and coaxial information technology cabling - Installed balanced cabling as specified in the standards series EN 50173

Standard No.

BS EN 61935-1:2009

Release Date

2010

Published By

British Standards Institution (BSI)

Latest

BS EN 61935-1:2009

Scope

This part of EN 61935 specifies reference measurement procedures for cabling parameters and the requirements for field tester accuracy to measure cabling parameters identified in series EN 50173. This standard does not apply to EN 50173-4. This International Standard applies when the cable assemblies are constructed of cables complying with the IEC 61156 family of standards, and connecting hardware as specified in IEC 60603-7 family of standards or IEC 61076-3-104 and IEC 61076-3-110. In the case where cables and/or connectors do not comply with these standards, then additional tests may be required. This standard is organized as follows: ? reference laboratory measurement procedures on cabling topologies are specified in Clause 4. In some cases, these procedures may be used in the field; ? descriptions and requirements for measurements in the field are specified in Clause 5; ? performance requirements for field testers and procedures to verify performance are specified in Clause 6. This standard relates to performance with respect to 100 Ω cabling. For 120 Ω or 150 Ω cabling, the same principles apply but the measurement system should correspond to the nominal impedance level. Field tester types include certification, qualification and verification. Certification testing is performed for the rigorous needs of commercial/industrial buildings to this standard. Qualification testing is described in IEC 61935-3. Qualification testing determines whether the cabling will support certain network technologies (e.g., 1000BASE-T, 100BASE-TX, IEEE 1394b1)). Qualification testers do not have traceable accuracy to national standards and provide confidence that specific applications will work. Verification testers only verify connectivity. Throughout this document, 4-pair cabling is assumed. The test procedures described in this standard may also be used to evaluate 2-pair balanced cabling. However, 2-pair cabling links that share the same sheath with other links are tested as 4-pair cabling.

BS EN 61935-1:2009 history

• 2010 BS EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling - Installed balanced cabling as specified in the standards series EN 50173
• 2006 BS EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1: Installed cabling