ISO 13341:2010
Gas cylinders - Fitting of valves to gas cylinders
- Standard No.
- ISO 13341:2010
- Release Date
- 2010
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 13341:2010/Amd 1:2015
- Latest
- ISO 13341:2010/Amd 1:2015
- Scope
- This International Standard specifies the procedures to be followed when connecting cylinder valves to gas cylinders. It specifically applies to all valve and cylinder combinations connected with ISO screw threads as specified in ISO 10920 and ISO 11363-1. It defines routines for inspection and preparation prior to valving for both taper and parallel screw threads. Torque values are given in Annex A for steel and aluminium gas cylinders including composite cylinders with steel or aluminium boss. NOTE The procedures and practices specified in this International Standard can be beneficially applied to other valve to cylinder screw thread connection systems. ISO/TR 11364[4] lists the valve to gas cylinder threads in use worldwide. It gives details of the thread identification codes, whether the threads are interchangeable with ISO threads and if the taping procedure and torque values specified in this International Standard can be used. ISO/TR 11364[4] gives clear guidance for the method and torque for all listed inlet threads, which are not interchangeable.
ISO 13341:2010 Referenced Document
- ISO 11114-2 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials*， 2021-09-30 Update
- ISO 11119-2 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharin*， 2023-05-11 Update
- ISO 11119-3 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sh*， 2023-07-11 Update
- ISO 15245-1 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification*， 2021-04-30 Update
ISO 13341:2010 history
- 2015 ISO 13341:2010/Amd 1:2015 Gas cylinders - Fitting of valves to gas cylinders; Amendment 1
- 2010 ISO 13341:2010 Gas cylinders - Fitting of valves to gas cylinders
- 1998 ISO 13341:1997/Cor 1:1998 Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1
- 1997 ISO 13341:1997 Transportable gas cylinders - Fitting of valves to gas cylinders
