International Organization for Standardization (ISO)
Latest
ISO 22968:2010
Scope
This International Standard specifies the terminology, test procedures and general requirements for the construction and operation of automatic forced draught oil burners supplied with a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) to 6 mm2/s (cSt) at 20 °C or higher, boiling petroleum in accordance with ISO 8217-based first raffinates, and the provision of related control and safety devices.
It is applicable to the following:
a)
automatic oil burners (hereinafter called “burners”) fitted with a combustion air fan and equipped as described in Clause 5, intended for use in appliances of different types and operated with fuel oils;
b)
single burners with a single combustion chamber, for which, where such burners are fitted to a single appliance, the requirements of the relevant appliance standard also apply;
c)
single-fuel and dual-fuel burners when operating only on oil;
d)
the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, which, for the former, the requirements of ISO 22967 also apply.
It is not applicable to burners used in direct fired processes either with defined combustion chamber applications or where the combustion chamber wall surface temperature is greater than 750 °C or the heat-transfer medium temperature is greater than 500 °C.
ISO 22968:2010 Referenced Document
IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements*, 2024-04-19 Update
IEC 60335-1:2001 Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-2-102:2004 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*, 2024-04-19 Update
IEC 60730-2-5:2004 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60747-5-2 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
IEC 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices*, 2024-03-26 Update
ISO 1129 Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 23550 Safety and control devices for gas and/or oil burners and appliances - General requirements*, 2018-04-01 Update
ISO 23552-1 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type AMENDMENT 1: Addition to the specific regional requirements in Japan
ISO 23553-1 Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves*, 2022-02-15 Update
ISO 3183 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems*, 2019-10-07 Update
ISO 6806 Rubber hoses and hose assemblies for use in oil burners*, 2024-04-01 Update
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation TECHNICAL CORRIGENDUM 1
ISO 7005 Metallic flanges; part 3: copper alloy and composite flanges
ISO 8217 Petroleum products - Fuels (class F) - Specifications of marine fuels*, 2017-03-01 Update
ISO 9329-1 Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
ISO 9330-1 Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties
ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories [Standard in French]*, 2017-11-01 Update