GOST 25161-1982
Broaches with diameter frome 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul frome 3,5 to 5 mm. Double driven. Construction and dimensions

Standard No.

GOST 25161-1982

Release Date

1982

Published By

RU-GOST R

Latest

GOST 25161-1982

Scope

This standard applies to double-pass broaches with a diameter from 70 to 90 mm, module from 3.5 to 5 mm, intended for processing

GOST 25161-1982 Referenced Document

• GOST 14034-1974 Centre holes. Dimensions
• GOST 19265-1973 Bars and strips out of high-speed steel. Specifications
• GOST 20365-1974 Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions
• GOST 25158-1982 Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul from 1 to 2,5 mm. Construction and dimensions
• GOST 5950-1973 Bars and strips of tool alloyed steel. Specifications
• GOST 6033-1980 Basic norms of interchangeability. Involute splined joints with 30° profile angle. Dimensions, tolerances and measurable sizes

GOST 25161-1982 history

• 1982 GOST 25161-1982 Broaches with diameter frome 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul frome 3,5 to 5 mm. Double driven. Construction and dimensions