GOST 24068-1980
Basic norms of interchangeability. Keyed joints with taper keys. Dimensions of keys and keyways. Tolerances and fits

Standard No.

GOST 24068-1980

Release Date

1980

Published By

RU-GOST R

Latest

GOST 24068-1980

Replace

GOST 8791-1968 GOST 8792-1968 GOST 8793-1968

Scope

This standard applies to keyed connections with wedge keys and establishes the dimensions and maximum deviations in size

GOST 24068-1980 Referenced Document

• GOST 24114-1980 Keyway prism gauges for shafts with diameter over 22 to 200 mm. Design and dimensions
• GOST 24115-1980 Keyway depth gauges for holes with diameter from 3 to 10 mm. Design and dimensions
• GOST 24116-1980 Keyway depth gauges for holes with diameter over 10 to 90 mm. Design and dimensions
• GOST 24117-1980 Keyway depth gauges for holes with diameter over 90 to 200 mm. Design and dimensions
• GOST 24118-1980 Keyway depth gauges for shafts with diameter from 6 to 200 mm. Design and dimensions
• GOST 24120-1980 Keyway gauges for dimensions from 1 to 3 mm. Design and dimensions
• GOST 24121-1980 Keyway gauges for dimensions over 3 to 50 mm. Design and dimensions
• GOST 6636-1969 Standard linear dimensions*， 2024-04-19 Update
• GOST 8787-1968 Cold-drawn steel for rectangular parallel keys. Assortment
• GOST 8908-1981 Basic norms of interchangeability. Standart angles and angle telerances*， 1981-04-19 Update

GOST 24068-1980 history

• 1980 GOST 24068-1980 Basic norms of interchangeability. Keyed joints with taper keys. Dimensions of keys and keyways. Tolerances and fits
• 0000 GOST 8793-1968