GOST 5949-1975
Sorted and gauged corrosion-resistant, heat-resistant and high-temperature steel. Specifications

Standard No.

GOST 5949-1975

Release Date

1975

Published By

RU-GOST R

Status

Be replaced 2018-06

Replace By

GOST 5949-2018

Latest

GOST 5949-2018

Replace

GOST 5949-1961 GOST 10500-1963

Scope

This standard applies to hot-rolled and forged steel with a diameter, square side or thickness up to 200 mm; calibrated st.

GOST 5949-1975 Referenced Document

• GOST 10145-1981 Metals. Stress-rupture test method*， 1981-04-19 Update
• GOST 10243-1975 Steel. Methods of test and estimation of macrostructure
• GOST 103-1976 Hot-rolled steel strip. Dimensions*， 1976-01-01 Update
• GOST 1051-1973 Gauged bars. General specifications
• GOST 11098-1975 Gauge callipers with reading arrangement. Specifications
• GOST 1133-1971 Forged round and square steel. Dimensions
• GOST 11878-1966 Austenitic steel bars. Methods for the determination of the ferrite-phase
• GOST 1497-1984 Metals. Methods of tension test*， 1984-04-19 Update
• GOST 166-1989 Vernier callipers. Specifications*， 1989-04-19 Update
• GOST 1778-1970 Steel. Metallographic methods for the determination of nonmetallic inclusions
• GOST 2216-1984 Adjustable plain snap gauges. Specifications*， 1984-04-19 Update
• GOST 2246-1970 Welding steel wire. Specifications
• GOST 2590-1988 Round steel bars. Dimensions*， 1988-04-19 Update
• GOST 2591-1988 Square hot-rolled steel bars. Dimensions*， 1988-04-19 Update
• GOST 2879-1988 Hot-rolled hexagonal steel. Dimensions*， 1988-01-01 Update
• GOST 427-1975 Measuring metal rules. Basic parameters and dimensions. Specifications
• GOST 4405-1975 Hot-rolled and wrought tool steel strips. Dimensions
• GOST 5632-1972 High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades*， 2024-04-19 Update
• GOST 5639-1982 Steel and alloys. Methods for detection and determination of grain size*， 1982-04-19 Update
• GOST 6032-2003 Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance*， 2024-04-19 Update
• GOST 6507-1990 Micrometers. Specifications*， 1990-04-19 Update
• GOST 7417-1975 Calibrated round steel. Dimensions
• GOST 7502-1998 Measuring metal tapes. Specifications*， 1998-04-19 Update
• GOST 7564-1997 Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing*， 1997-04-19 Update
• GOST 7565-1981 Iron, steel and alloys. Sampling for determination of chemical composition*， 1981-04-19 Update
• GOST 7566-1994 Metal products. Acceptance, marking, packing, transportation and storage*， 1994-04-19 Update
• GOST 8559-1975 Calibrated square steel. Dimensions
• GOST 8560-1978 Calibrated hexahedronal rolled-stock. Dimensions*， 1978-04-19 Update
• GOST 8817-1982 Metals. Upsetting test method*， 1982-04-19 Update
• GOST 9012-1959 Metals. Method of Brinell hardness measurement*， 2024-04-19 Update
• GOST 9013-1959 Metals. Method of measuring Rockwell hardness*， 2024-04-19 Update
• GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature*， 1978-04-19 Update
• GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures*， 1984-04-19 Update

GOST 5949-1975 history

• 2018 GOST 5949-2018 Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
• 1975 GOST 5949-1975 Sorted and gauged corrosion-resistant, heat-resistant and high-temperature steel. Specifications
• 0000 GOST 10500-1963
• 0000 GOST 5949-1961