GOST 2838-1980 PDF

Scope: This standard applies to wrenches manufactured for the needs of the national economy and for export. The standard is not widespread

GOST 2838-1980 Referenced Document

GOST 18088-1983 Metall-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxliary*， 1983-04-19 Update
GOST 26810-1986 Fittter tools. Acceptance rules*， 1986-04-19 Update
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 6424-1973 Jaw (mouth), end of the wrench and width across flats
GOST 7062-1990 Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances*， 1990-04-19 Update
GOST 7505-1989 Steel stamping forgings. Tolerances, allowances and forging laps*， 1989-04-19 Update
GOST 7829-1970 Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances
GOST 8.064-1994 State system for ensuring the uniformity of measurements. State verification shedule for means measuring hardness on Rockwell and Super-Rockwell scales*， 1994-04-19 Update
GOST 9.032-1974 Unified system corrosion and ageing protection. Coatings of lacguers and paints. Classification and designations
GOST 9.302-1988 Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods*， 1988-04-19 Update
GOST 9.303-1984 Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection*， 1984-04-19 Update
GOST 9.306-1985 Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. Symbols*， 1985-04-19 Update