EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loosefill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
This European Standard specifies the requirements for blown loose-fill mineral wool products for in-situ installation in lofts, masonry cavity walls and frame constructions.This European standard is a specification for the insulation products before installation. It describes the product characteristics and includes procedures for testing, marking and labelling.This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. NOTE To avoid water penetration in masonry walls special tests adjusted to local climate might be needed.This document does not cover factory made mineral wool (MW) insulation products or in-situ products intended to be used for the insulation of building equipment and industrial installations. Products with a declared thermal resistance lower than 0,25 m2-K/W or a declared thermal conductivity greater than 0,060 W/(m-K) at 10 ℃ are not covered byThis document.This document does not cover products intended for airborne sound insulation and for acoustic absorption applications.
EN 14064-1:2010 Referenced Document
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 13172:2008 Thermal insulating products - Evaluation of conformity
EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (Incorporates Amendment A1: 2009)
EN 13820:2003 Thermal insulating materials for building applications - Determination of organic content
EN 13823:2002 Reaction to Fire Tests for Building Products - Bulding Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item
EN 15715:2009 Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products*， 2024-04-19 Update
EN 1609:1996 Thermal Insulating Products for Building Applications - Determination of Short Term Water Absorption by Partial Immersion (Incorporating Corrigendum)
EN 29053:1993 Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991)
EN 823:1994 Thermal Insulating Products for Building Applications - Determination of Thickness
EN ISO 1182:2002 Reaction to Fire Tests for Building Products - Non-Combustibility Test ISO 1182:2002
EN ISO 11925-2:2002 Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test ISO 11925-2: 2002
EN ISO 1716:2002 Reaction to Fire Tests for Building Products - Determination of the Heat of Combustion iso 1716: 2002
EN 14064-1:2010 history
2018EN 14064-1:2018 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
2010EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loosefill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation