NB/T 20005.9-2010 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 9: Seamless steel pipes for class 2,3 piping (English Version)
This part specifies the chemical composition, mechanical properties, test methods, inspection rules, external dimensions, weight and other technical requirements for grade 2 and 3 20, 16Mn carbon steel and low alloy steel seamless steel pipes for pressurized water reactor nuclear power plants. This section applies to grade 2 carbon steel and low alloy steel seamless steel pipes with a nominal outer diameter less than 550 mm and a nominal wall thickness less than 50 mm in pressurized water reactor nuclear power plants, as well as with a nominal outer diameter not greater than 610 mm and a nominal wall thickness not greater than 40 mm grade 3 carbon steel seamless steel pipe. This section does not apply to seamless steel pipes used in the main feed water flow control system, auxiliary water supply system, turbine bypass system and main steam system in pressurized water reactor nuclear power plants. This section also does not apply to heat exchanger heat transfer tubes.
NB/T 20005.9-2010 Referenced Document
GB/T 223.18 Methods for chemical analysis of iron steel and alloy.The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19 Methods for chemical analysis of iron,steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy--The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.5 Steel and iron.Determination of acid-soluble silicon and total silicon content.Reduced molybdosilicate spectrophotometric method
GB/T 223.50 Methods for chemical analysis of iron, steel and alloy. The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.53 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.58 Methods for chemical analysis of iron,steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
GB/T 223.59 Iron,steel and alloy.Determination of phosphorus content.Bismuth phosphomolybdate blue spectrophotometic method and antimony phosphomolybdate blue spectruophotometric method
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method*, 2022-07-11 Update
GB/T 223.64 Iron,steel and alloy.Determination of manganese content.Flame atomic absorption spectrometric method
GB/T 223.67 Iron,steel and alloy.Determination of sulfur content.Methylene blue spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72 Iron,steel and alloy.Determination of sulfur content.Gravimetric method
GB/T 228-2002 Metallic materials--Tensile testing at ambient temperature
GB/T 229-2007 Metallic materials- Charpy pendulum impact test method
GB/T 232 Metallic materials - Bend test methods*, 2024-03-15 Update
GB/T 24 Bolts,small hexagon head with fit neck and hole through the shank
GB/T 241 Metal materials-Tube.Hydrostatic pressure test
NB/T 20005.9-2010 history
2017NB/T 20005.9-2017 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants Part 9: Grade 2 and 3 seamless steel pipes
2010NB/T 20005.9-2010 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 9: Seamless steel pipes for class 2,3 piping