DIN 45673-8:2010
Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports

Standard No.

DIN 45673-8:2010

Release Date

2010

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 45673-8:2018

DIN 45673-8 Bb.1:2013

Latest

DIN 45673-8 Beiblatt 1:2020-02

Replace

DIN 45673-1:2000 DIN 45673-8:2009

Scope

This standard specifies laboratory test procedures for determining the parameters used to describe the static and dynamic properties of continuous elastic rail support systems used on all types of railways. The standard convers those parameters that are relevant for describing the effectivenes of a track structure in mitigating vibrations, that is, in reducing the emission of vibrations and structure-borne noise. It is not prossible to specify generally applicable load ranges for continuous elastic rail support systems, as such a load range depends both on the axle load and on the elasticity of the system itself. For the purposes of standardization, therefore, standard cases are described that can be amended as necessary to accommodate individual special cases. In addition to specifying the basic testing of relevant properties of continuous elastic rail support systems, this standard also specifies procedures for testing fitness for purpose and provides information on quality monitoring as part of quality assurance procedures. However, this standard does not contain requirements pertaining to the properties of continuous elastic rail support systems.

DIN 45673-8:2010 Referenced Document

• DIN 45673-1 Mechanical vibration - Resilient elements used in railway tracks - Part 1: Terms and definitions, classification, test procedures
• DIN 53504 Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
• DIN 53508 Testing of rubber - Accelerated ageing*， 2024-03-01 Update
• DIN EN 50122-2 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems; German version EN 50122-2:2010*， 2011-09-01 Update
• DIN EN ISO 10846-2 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008); German vers...
• DIN EN ISO 1798 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008); German version EN ISO 1798:2008
• DIN EN ISO 1856 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018); German version EN ISO 1856:2018*， 2020-11-01 Update
• DIN ISO 815 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)

DIN 45673-8:2010 history

• 2020 DIN 45673-8 Beiblatt 1:2020-02 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports; Supplement 1: Test form, with CD-ROM / Note: CD-ROM
• 2018 DIN 45673-8:2018-12 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 2018 DIN 45673-8:2018 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 1970 DIN 45673-8 E:2015-04 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 2015 DIN 45673-8 E:2015 Draft Document - Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 1970 DIN 45673-8 Beiblatt 1:2013-07 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports; Supplement 1: Test form
• 2013 DIN 45673-8 Bb.1:2013 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports - Supplement 1: Test form; with CD-ROM
• 2010 DIN 45673-8:2010 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 1970 DIN 45673-8 E:2009-04 Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
• 0000 DIN 45673-8:2009
• 2000 DIN 45673-1:2000 Mechanical vibration - Resilient elements used in railway tracks - Part 1: Laboratory determination of static and dynamic characteristics