This European Standard specifies the characteristics and performance of metal beads, metal beads combined with
paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum
boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in
Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon
their material and type, can be featured without decoration, decorated or finished with jointing compounds to
receive decoration.
It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be
measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this EN.
This European Standard covers also additional technical characteristics that are of importance for the use and
acceptance of the product by the construction industry and the reference tests for these characteristics.
BS EN 14353:2007+A1:2010 Referenced Document
EN 10131 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10139 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions*, 2018-02-01 Update
EN 10140 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10143 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10152 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions*, 2017-01-01 Update
EN 10346 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions*, 2015-07-01 Update
EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13963 Jointing materials for gypsum boards - Definitions, requirements and test methods*, 2014-07-01 Update
EN 15283-1 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement*, 2009-08-01 Update
EN 15283-2 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards*, 2009-08-01 Update
EN 520 Gypsum plasterboards - Definitions, requirements and test methods*, 2009-08-01 Update
EN 755 Aluminium and aluminium alloys - Extruded rod/bar@ tube and profiles - Part 9: Profiles@ tolerances on dimensions and form*, 2016-06-01 Update
EN ISO 1924-2 Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)*, 2024-04-19 Update
EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/DAM 1:2023)
BS EN 14353:2007+A1:2010 history
2017BS EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods
2008BS EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
2008BS EN 14353:2007 Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods