UL 991-2004 PDF

Scope: 1.1 These requirements apply to controls that employ solid-state devices and are intended for specified safety-related protective functions. 1.2 These requirements address the potential risks unique to the electronic nature of a control. Equipment or components employing an electronic feature shall also comply with the basic construction and performance requirements contained in the applicable end-product or component standard. These requirements are intended to supplement applicable end-product or component standards and are not intended to serve as the sole basis for investigating the risks of fire, electric shock, or injury to persons associated with a control. 1.3 These requirements do not cover controls covered by end-product standards in which an electronic control investigation is specified. 1.4 Sections 9 - 22 contain standardized test methods for investigating the performance of an electronic control when subjected to particular environmental stresses. The suitability of each test to a given control shall be determined by the end-product standard(s). Determination shall include an assessment of: a) Whether the control will be exposed to a particular environmental stress in its application, and b) Whether the response of the control to a particular environmental stress is relevant to its intended safety-related protective function in its application.

UL 991-2004 history

1970 UL 991-2010 Tests for safety-related controls employing solid-state devices
2007 UL 991 CRD-2007 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices - Section/Paragraph Reference: Section 18 (Edition 3: October 22, 2004)
2004 UL 991-2004 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices Third Edition; Reprint with revisions through and including April 2, 2008
2000 UL 991 BULLETIN-2000 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices
1995 UL 991-1995 Tests for safety-related controls employing solid-state devices
1989 UL 991-1989 Tests for safety-related controls employing solid-state devices