SAE AMS4339A-2004
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged UNS A92024 [Superseded: SAE AMS 4112D]

Standard No.

SAE AMS4339A-2004

Release Date

2004

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced 2018-02

Replace By

SAE AMS4339B-2018

Latest

SAE AMS4339B-2018

Scope

This specification covers an aluminum alloy in the form of rolled or cold finished bars and rods. These products have been used typically for parts requiring higher yield strength than is afforded by naturally aged tempers of this alloy and whose fabrication does not involve welding, but usage is not limited to such applications.

SAE AMS4339A-2004 Referenced Document

• ASTM B660-02 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• ASTM B666/B666M-01 Standard Practice for Identification Marking of Aluminum and Magnesium Products
• ASTM E594-96 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
• SAE AMS2355G-2002 Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloys Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
• SAE AMS2772-1997 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)

SAE AMS4339A-2004 history

• 2018 SAE AMS4339B-2018 Aluminum Alloy@ Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated@ Cold Worked@ and Artificially Aged (UNS A92024)
• 2004 SAE AMS4339A-2004 Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged UNS A92024 [Superseded: SAE AMS 4112D]
• 1994 SAE AMS4339-1994 Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5Mg 0.60Mn Solution Heat Treated, Cold Worked, and Artificially Aged