DIN EN 14492-2:2010
Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German version EN 14492-2:2006+A1:2009
- Standard No.
- DIN EN 14492-2:2010
- Release Date
- 2010
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 14492-2 E:2016
- Latest
- DIN EN 14492-2/A1:2022-08
- Replace
- DIN EN 14492-2:2007 DIN EN 14492-2/A1:2009
- Scope
- This European Standard specifies requirements for power driven hoists with or without trolleys for which the prime mover is an electric, hydraulic or pneumatic motor. They are designed for the lifting and lowering of loads which are suspended on hooks or other hoisting mediums. Hoists are characterised by the use of either round steel ropes or belts driven by drums and link or roller chains driven by sprockets or sprocket wheels respectively. This European Standard applies to the following types of hoist: a) rope drum hoists with round steel ropes or belts.
DIN EN 14492-2:2010 Referenced Document
- EN 1127-1:1997 Explosive Atmospheres - Explosion Prevention and Protection - Part 1: Basic Concepts and Methodology
- EN 12077-2:1998 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices (Incorporates Amendment A1: 2008)
- EN 12644-2:2000 Cranes - Information for use and testing - Part 2: Marking (Incorporates Amendment A1: 2008)
- EN 13001-2:2004 Crane safety - General design - Part 2: Load effects Incorporates Amendment A3: 2009*， 2024-04-19 Update
- EN 13411-3:2004 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing (Incorporates Amendment A1: 2008)
- EN 13411-6:2004 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket (Incorporates Amendment A1: 2008)
- EN 13463-1:2001 Non-Electrical Equipment for Potentially Explosive Atmospheres - Part 1: Basic Method and Requirements*， 2024-04-19 Update
- EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
- EN 13557:2003 Cranes - Controls and control stations Incorporates Amendment A2: 2008*， 2024-04-19 Update
- EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
- EN 60034-1:2004 Rotating electrical machines Part 1: Rating and performance
- EN 818-1:1996 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance (Incorporates Amendment A1: 2008)
- EN 818-7:2002 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) (Incorporates Amendment A1: 2008)
- EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008
- EN 983:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics Incorporates Amendment A1: 2008
DIN EN 14492-2:2010 history
- 2022 DIN EN 14492-2/A1:2022-08 Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German and English version EN 14492-2:2019/prA1:2022 / Note: Date of issue 2022-06-24*Intended as an amendment to DIN EN 14492-2 (2019-09).
- 2019 DIN EN 14492-2:2019-09 Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German version EN 14492-2:2019 / Note: To be amended by DIN EN 14492-2/A1 (2022-08).
- 2019 DIN EN 14492-2:2019 Cranes - Power driven winches and hoists - Part 2: Power driven hoists
- 1970 DIN EN 14492-2 E:2016-08 Cranes - Power driven winches and hoists - Part 2: Power driven hoists
- 2016 DIN EN 14492-2 E:2016 Draft Document - Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German and English version prEN 14492-2:2016
- 2010 DIN EN 14492-2:2010 Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German version EN 14492-2:2006+A1:2009
- 2007 DIN EN 14492-2:2007 Cranes - Power driven winches and hoists - Part 2: Power driven hoists; German version EN 14492-2:2006
