DIN ISO 702-1:2010
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)

Standard No.

DIN ISO 702-1:2010

Release Date

2010

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 702-1:2010-04

Latest

DIN ISO 702-1:2010-04

Replace

DIN 55026:1980 DIN 55028:1980 DIN ISO 702-1:2008

Scope

This part of ISO 702 specifies the dimensions for the interchangeability of tapered spindle heads on lathes and the corresponding contact surfaces of mounting plates or lathe chucks. * Table of contents

DIN ISO 702-1:2010 history

• 2010 DIN ISO 702-1:2010-04 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)
• 2010 DIN ISO 702-1:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)
• 0000 DIN ISO 702-1:2008
• 1980 DIN 55028:1980 Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027

DIN ISO 702-1:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009) has been changed from DIN 55026:1980 Machine Tools; Spindle Noses with Centering Taper and Flange; Dimensions.

DIN ISO 702-1:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009) has been changed from DIN 55028:1980 Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027.