The fastening clamps according to this standard are used for mounting of pipes with outside diameters of 57 mm up to 89 mm. This clamps with elastomer insert can be used within an environmental temperature range from -20 ФC to 120 ФC.
DIN 86025-1:2010 Referenced Document
DIN 86025-3 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 3: Inserts
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German and English version prEN 10088-2:2021 / Note: Date of issue 2021-12-03*Intended as replacement for DIN EN 1008...*, 2022-01-01 Update
DIN EN 10327 Continuously hot-dip coated strip and sheet made of soft steels for cold forming – Technical delivery conditions; German version EN 10327:2004
DIN EN 12329 Corrosion protection of metals – Galvanic zinc coatings on ferrous materials with additional treatment
DIN EN ISO 3506-1 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020*, 2020-08-01 Update
DIN EN ISO 3506-2 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020); German version EN ISO 3506-2:2020*, 2020-08-01 Update
DIN EN ISO 3506-3 Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes (ISO/DIS 3506-3:2023); German and English version prEN I...*, 2024-01-01 Update
DIN EN ISO 4017 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022); German version EN ISO 4017:2022*, 2022-10-01 Update
DIN EN ISO 898-1 echanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013)*, 2013-05-01 Update
DIN ISO 2768-1 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
DIN 86025-1:2010 history
2010DIN 86025-1:2010-04 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 1: Type A without insert, Type B with insert
2010DIN 86025-1:2010 Pipe clamps for shipboard use - Fastening clamps with bracket - Part 1: Type A without insert, Type B with insert
1997DIN 86025-1:1997 Fastening clamps with bracket - Part 1: Type A without insert, type B with insert