This standard specifies the requirements for two types of hoses and hose assemblies, low-pressure hoses and hose assemblies with a maximum working pressure of 0.6MPa and high-pressure hoses and hose assemblies with a maximum working pressure of 1.8MPa. The parts are composed of rubber hoses and metal joints, used to transport saturated steam and condensed water. Each type is divided into two grades: the outer coating is oil-resistant and the outer coating is not oil-resistant.
HG/T 3036-2009 Referenced Document
GB/T 14905 Rubber and plastics hoses—Determination of adhesion between components*, 2020-11-19 Update
GB/T 1690 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids*, 2011-01-14 Update
GB/T 24134-2009 Rubber and plastics hoses.Assessment of ozone resistance under static conditions
GB/T 3512 Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests.Air-oven method*, 2014-12-22 Update
GB/T 528 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 5563 Rubber and plastics hoses and hose assemblies.Hydrostatic testing*, 2013-12-31 Update
GB/T 5565 Rubber or plastics hoses and tubing. Bending tests
GB/T 7528-2002 Rubber and plastics hoses and hose assemblies--Vocabulary
GB/T 9572-2001 Rubber and plastics hoses and hose assemblies--Determination of electrical resistance
GB/T 9573 Rubber and plastics hoses and hose assemblies.Methods of measurement of the dimensions of hoses and the lengths of hose assemblies*, 2013-07-19 Update
GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
HG/T 3036-2009 history
2009HG/T 3036-2009 Rubber hoses and hose assemblies for saturated steam.Specification
1999HG/T 3036-1999 Rubber hoses and hose assemblies for steam