SAE AS4309C-2009
Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
Home
SAE AS4309C-2009
Standard No.
SAE AS4309C-2009
Release Date
2009
Published By
Society of Automotive Engineers (SAE)
Status
Be replaced
2015-04
Replace By
SAE AS4309D-2015
Latest
SAE AS4309D-2015
SAE AS4309C-2009 Referenced Document
ASME B46.1-2002
Surface texture (surface roughness, waviness, and lay)
*
,
2023-12-22 Update
ASME B46.1-2009
Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)
*
,
2023-12-22 Update
ASME Y14.36M-1996
Surface Texture Symbols
ASME Y14.5M-1994
Dimensioning and tolerancing
SAE AMS-QQ-A-225/6-1997
Aluminum Alloy@ 2024@ Bar@ Rod@ and Wire; Rolled@ Drawn@ or Cold Finished (UNS A92024)
SAE AMS-QQ-A-225/9-1997
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
SAE AMS2472F-2007
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating
SAE AMS2700-2000
Passivation of Corrosion Resistant Steels
SAE AMS4112
ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 4.5Cu - 1.5Mg - 0.60Mn (2024-T6)
SAE AMS4124D-2005
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075
SAE AMS5639H-2002
Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Tubing@ and Rings 19Cr - 10Ni Solution Heat Treated (UNS S30400)
SAE AMS5645P
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (SAE 30321) Solution Heat Treated
SAE AS4309C-2009 history
2015
SAE AS4309D-2015
FITTING@ NIPPLE@ FLARED TUBE TO PIPE THREAD@ FOR SEAL RING
2009
SAE AS4309C-2009
Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
2007
SAE AS4309B-2007
Nipple - Flared Tube to Pipe Thread, for Seal Ring
2006
SAE AS4309A-2006
Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
2002
SAE AS4309-2002
NIPPLE - FLARED TUBE TO PIPE THREAD, FOR SEAL RING
1993
SAE AS4309-1993
Nipple - Flared Tube to Pipe Thread@ for Seal Ring
Copyright ©2023 All Rights Reserved