SAE AS893D-2009 PDF

SAE AS893D-2009 Referenced Document

ASME B46.1-2002 Surface texture (surface roughness, waviness, and lay)*， 2023-12-22 Update
ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)*， 2023-12-22 Update
ASME Y14.36M-1996 Surface Texture Symbols
ASME Y14.5M-1994 Dimensioning and tolerancing
SAE AMS-QQ-A-225/6-1997 Aluminum Alloy@ 2024@ Bar@ Rod@ and Wire; Rolled@ Drawn@ or Cold Finished (UNS A92024)
SAE AMS-QQ-A-225/9-1997 Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
SAE AMS4124D-2005 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075
SAE AMS4133 ALUMINUM ALLOY FORGINGS 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6)
SAE AMS4141 ALUMINUM ALLOY DIE FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (7075-T73)
SAE AMS4339-1994 Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5Mg 0.60Mn Solution Heat Treated, Cold Worked, and Artificially Aged

2020 SAE AS893F-2020 FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON SIDE, EXTERNAL THREAD
2017 SAE AS893E-2017 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS TUBE TO PIPE ON SIDE@ EXTERNAL THREAD
2011 SAE AS893A-2011 Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread
2009 SAE AS893D-2009 Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread
2008 SAE AS893C-2008 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS TUBE TO PIPE ON SIDE@ EXTERNAL THREAD
2007 SAE AS893B-2007 FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON SIDE, EXTERNAL THREAD
1995 SAE AS893B-1995 Fitting@ Tee@ Standard and Reducer@ Flareless Tube to Pipe on Side@ External Thread
1976 SAE AS893-1976 TEE, FLARELESS TUBE TO MALE PIPE ON SIDE
1941 SAE AS893-3-1941 AS893 Spring Ring - Trim Control