SAE AMS5597F-2009
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni 19Cr 3.0Mo 5.1Cb (Nb) 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted, 1950°F (1066°C) Solution Heat Treated

Standard No.

SAE AMS5597F-2009

Release Date

2009

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS5597F-2015

Latest

SAE AMS5597H-2022

Scope

This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate. These products have been used typically for parts, such as cases and ducts, requiring high strength at cryogenic temperatures and for short-time use up to 1000 °F (538 °C), particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.

SAE AMS5597F-2009 Referenced Document

• ASTM A480/A480M-09 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip*， 2024-04-19 Update
• ASTM E18-08 Standard Test Methods for Rockwell Hardness of Metallic Materials*， 2024-04-19 Update
• ASTM E290-09 Standard Test Methods for Bend Testing of Material for Ductility*， 2024-04-19 Update
• ASTM E8/E8M-08 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-19 Update
• ASTM E8/E8M-09 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-19 Update
• SAE AMS2262 TOLERANCES Nickel and Nickel-Base Alloy Sheet and Strip
• SAE AMS2269F-2006 Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys [Superseded: SAE AMS 2268B]
• SAE AMS2371H-2007 Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock*， 2024-04-19 Update
• SAE AMS2807-1991 Identification Carbon and Low-Alloy Steels@ Corrosion and Heat Resistant Steels and Alloys Sheet@ Strip@ Plate@ and Aircraft Tubing
• SAE AS4194-1991 Sheet and Strip Surface Finish Nomenclature

SAE AMS5597F-2009 history

• 2022 SAE AMS5597H-2022 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
• 2016 SAE AMS5597G-2016 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated (UNS N07718)
• 2015 SAE AMS5597F-2015 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
• 2009 SAE AMS5597F-2009 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni 19Cr 3.0Mo 5.1Cb (Nb) 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted, 1950°F (1066°C) Solution Heat Treated
• 2006 SAE AMS5597E-2006 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
• 2001 SAE AMS5597E-2001 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe, Consumable Electrode or Vacuum Induction Melted, 1950°F (1066°C) Solution Heat Treated
• 2000 SAE AMS5597D-2000 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
• 1994 SAE AMS5597D-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Sheet@ Strip@ and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated (UNS N07718)
• 1988 SAE AMS5597C-1988 ALLOY SHEET@ STRIP@ AND PLATE@ CORROSION AND HEAT RESISTANT 52.5Ni - 19Cr - 3.0No - 5.1 (Cb + Ta) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950F (1067C) Solution Heat Treated (UNS N07718)
• 1981 SAE AMS5597B-1981 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 52.5Ni - 19Cr - 3.0Mo - 5.1 (Cb + Ta) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950° F (1065° C) Solution Heat Treated
• 1967 SAE AMS5597A-1967 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode or Vacuum Induction Melted 1950 F (1065.6 C) Solution Treated
• 1965 SAE AMS5597-1965 ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.1Mo - 5.1(Cb + Ta) - 0.90Ti - 0.50Al Consumable Electrode Melted, Solution Treated at 1950 F (1065.6 C)