DIN EN 12012-3:2010
Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders; German version EN 12012-3:2001+A1:2008
- Standard No.
- DIN EN 12012-3:2010
- Release Date
- 2010
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 12012-1:2018
- Latest
- DIN EN 12012-1:2018
- Replace
- DIN EN 12012-3/A1:2008 DIN EN 12012-3:2001
- Scope
- This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber. The machine begins with the outer edge of the feed hopper and ends with the discharge area. Significant hazards are listed in clause 4, specific requirements and/or measures applicable to shredders are listed in clause 5. This standard applies primarily to machines which are manufactured after the date of publication of this standard.
DIN EN 12012-3:2010 Referenced Document
- EN 1037:1995 Safety of machinery - Prevention of unexpected start-up (Incorporates Amendment A1: 2008)
- EN 1070 Safety of Machinery - Terminology
- EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection Incorporates Amendment A2: 2008
- EN 294:1992 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
- EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
- EN 50014 Electrical Apparatus for Potentially Explosive Atmospheres General Requirements (Incorporates Corrigenda September 1997 and April 1998)
- EN 50015 "Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion ""o"""
- EN 50016 "Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus ""p"""
- EN 50017 "Electrical Apparatus for Potentially Explosive Atmospheres - Powder Filling ""q"""
- EN 50018 Electrical Apparatus for Potentially Explosive Atmospheres - Flameproof Enclosures 'd'
- EN 50019 "Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety ""e"" (Incorporating Corrigendum April 2003)"
- EN 50020 Electrical Apparatus for Potentially Explosive Atmospheres - Intrinsic Safety 'i'
- EN 60204-1:1997 Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements (Remains Current)
- EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
- EN 626-1:1994 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (Incorporates Amendment A1: 2008)
- EN 953:1997 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (Incorporates Amendment A1: 2009)
- EN 954-1:1996 Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design
- EN 999:1998 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body Incorporates Amendment A1: 2008
- EN ISO 3741:1999 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Precision Methods for Reverberation Rooms
- EN ISO 3743-1:1995 Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 1: Comparison Method for Hard-Walled Test Rooms (ISO 3743-1 : 1994)
- EN ISO 3744:1995 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field Over a Reflecting Plane (ISO 3744 : 1994)
DIN EN 12012-3:2010 history
- 2018 DIN EN 12012-1:2018 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders; German version EN 12012-1:2018
- 2010 DIN EN 12012-3:2010 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders; German version EN 12012-3:2001+A1:2008
- 0000 DIN EN 12012-3/A1:2008
- 0000 DIN EN 12012-3:2001
