BS EN 1012-2:1996+A1:2009
Compressors and vacuum pumps - Safety requirements - Vacuum pumps

Standard No.
BS EN 1012-2:1996+A1:2009
Release Date
1997
Published By
British Standards Institution (BSI)
Latest
BS EN 1012-2:1996+A1:2009
Replace
93/717196 DC-1993 BS EN 1012-2:1997
Scope
This standard is applicable to all vacuum pumps, vacuum pump combinations and vacuum pumping systems. The standard lists the significant hazards associated with vacuum pumps and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of vacuum pumps during their foreseeable life and subsequent disposal. The scope does not include pumps designed to pump continuously on open systems where the pump inlet pressure is above 75 kPA (750 mbar) absolute, i.e. vacuum cleaners, ventilation fans). Vacuum pumps intended for use in special applications shall also comply with any specific standards relating to those applications.

BS EN 1012-2:1996+A1:2009 Referenced Document

  • EN 1127-1 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
  • EN 294:1992 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
  • EN 418 Safety of machinery; emergency stop equipment, functional aspects; principles for design
  • EN 50014 Electrical Apparatus for Potentially Explosive Atmospheres General Requirements (Incorporates Corrigenda September 1997 and April 1998)*1997-06-01 Update
  • EN 50081-2 Electromagnetic Compatibility - Generic Emission Standard Part 2: Industrial Environment
  • EN 50082-2 Electromagnetic Compatibility Generic Immunity Standard Part 2: Industrial Environment
  • EN 563 Safety of Machinery - Temperatures of Touchable Surfaces - Ergonomics Data to Establish Temperature Limit Values for Hot Surfaces Includes Amendment A1: 1999*1999-07-01 Update
  • EN 60204-1:1992 Safety of machinery; electrical equipment of machines; part 1: general requirements (IEC 204-1:1992, modified)
  • EN 60529 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
  • EN 61310-1 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals*2008-02-01 Update
  • EN 953 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (Incorporates Amendment A1: 2009)*1997-04-19 Update
  • EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles Incorporates Amendment A1: 2009 [Superseded: CEN EN 292-2]*2024-04-19 Update
  • EN ISO 2151 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)*2008-08-01 Update
  • IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements*2017-01-01 Update
  • ISO 3266 Forged steel eyebolts grade 4 for general lifting purposes AMENDMENT 1*2010-01-01 Update
  • ISO 3529 Vacuum technology - Vocabulary - Part 3: Total and partial pressure vacuum gauges*2014-04-01 Update
  • ISO 4126-1 Safety devices for protection against excessive pressure — Part 1: Safety valves AMENDMENT 1*2013-01-01 Update
  • ISO 4871 Acoustics - Declaration and verification of noise emission values of machinery and equipment
  • ISO 7000 Graphical symbols for use on equipment — Index and synopsis*2019-07-12 Update
  • ISO/TR 11688-1 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning

BS EN 1012-2:1996+A1:2009 history

Compressors and vacuum pumps - Safety requirements - Vacuum pumps



Copyright ©2024 All Rights Reserved